DSpace

King Saud University Repository >
King Saud University >
COLLEGES >
Science Colleges >
College of Engineering >
College of Engineering >

Please use this identifier to cite or link to this item: http://hdl.handle.net/123456789/13468

Title: Growth instability during planar solidification with a mold of finite thermal capacity
Authors: Yigit, F.
Keywords: Casting; Growth (materials); Heat conduction; Heat flux; Interfaces (materials); Molds; Residual stresses
تاريخ النشر: 1999
Publisher: Taylor & Francis Ltd, London, United Kingdom
Citation: Journal of Thermal Stresses Volume 22, Issue 8, November 1999, Pages 757-779
Abstract: The temperature and the stress fields in the solidified layer and in the mold of finite thickness for a unidirectional casting process are investigated. Earlier solutions are extended to include the effect of the thermal capacity of the mold on the freezing front growth instability. A numerical solution is obtained for both the heat conduction and the residual stress problem. The results show that the perturbation in contact pressure tends asymptotically to a maximum value at larger times for the lower values of the thermal capacities of the mold materials. The magnitude of the contact pressure perturbation is decreased by the inclusion of the thermal capacity of the mold material, and this effect is enhanced for less distortive and thicker molds. The present article assumes that the thermal and mechanical problems are uncoupled along the casting/mold interface. Despite this limitation, the results presented in this article indicate that a mold with a higher thermal capacity (or lower thermal diffusivity) might be less susceptible to thermoelastic instabilities associated with the contact pressure and its dependence on the thermal contact resistance at the casting/mold interface.
URI: http://hdl.handle.net/123456789/13468
ISSN: 01495739
يظهر في المجموعات:College of Engineering

:الملفات في هذا العنصر

ملف وصف حجمالنوع
2.docx16.96 kBMicrosoft Word XMLعرض\u0641تح

جميع جميع الابحاث محمية بموجب حقوق الطباعة، جميع الحقوق محفوظة.

 

البرمجيات DSpace حقوق المؤلف © 2002-2009 معهد ماساتشوستس للتكنولوجيا و Hewlet Packard - التغذية الراجعة